Hafenskipper 2 Manual: Free running mode

5. Free running mode

In the free running mode, you can try all maneuvers as you like. There is no time limit and the speed limit is not enforced. With Hafenskipper 2 you can choose from different starting positions from the main menu and you can set the orientation of the ship at the beginning.

5.1         Wind

Within the free mode, you can enable wind by pushing the cloud symbol. In the wind dialog, move the cloud into the direction into which the wind shall blow.

The further you pull the cloud, the stronger the wind blows. The strength of the wind is shown on the cloud in knots.

You can set a maximum wind of 10kt in standard mode. When you enable the strong wind mode in the settings menu, you can set up to 20kt.

5.2         Water current

In the free harbor mode, you can also adjust the water current. The further you pull the wave symbol from the center position, the higher the water current. You can set a maximum current velocity of 4.0 kt.

Back to contents of the Hafenskipper 2 manual

or go to the 6. Chapter – The bay